Printability testers that are ideal for quality control and laboratory areas not requiring the additional features of IGT AIC21-5, Global Standard Tester, C1 or Orange Proofer.
ConsumablesInformation Request

Two inking units with a common drive for distributing two different oils or inks at the same time.
Information Request

Extremely comprehensive unit, capable of performing all the IGT tests for Offset, Flexo and Grauvre.
ConsumablesInformation Request

Dedicated offset proofer with a built in inking unit. Selectable printing pressure and speed. Ideal for quality control environment.
Information Request

A range of powerful Windows based software for the analysis of paper formation, unevenness of print, blackening, dirt counting, stickies, missing dots, Heliotests, pinholes, bleeding and wicking. Will support image inputs from either flatbed scanners or cameras.
Information Request

For the determination of the tack of an ink. Very robust and repeatable. Complete with cooling unit.
Information Request

Enables both direct and indirect coating of hand sheets, or a continuous web up to 300 mm wide. Precise metering of coating from doctored gravure cylinders.
Information Request

Microprocessor controlled, dedicated flexo proofer. Large selection of anilox rollers available to suit individual requirements. New version available for proofing water based, as well as solvent based inks. Specialised F1 Corrugated version designed for proofing corrugated board.
Information Request

Selectable printing conditions and a large selection of anilox rollers. Bespoke anilox rollers can be made to individual requirements.
Information Request

A range of 6 microprocessor controlled units with either constant or accelerating speeds, dedicated to specific tests - ie Pick Test, Westvaco Pick Test, Helio Test, Wet on Wet Test, CEN Toner Adhesion Test. Ideal replacement for the manual A1 and A2 models.
ConsumablesInformation Request

Microprocessor controlled, with selectable inking sequences for the inking of printing discs. Extremely rapid. Saves significant amounts of operator time. The operating temperature of the rollers and ink can be selected and maintained.
ConsumablesInformation Request

Extensive range of bench top UV dryers for hardening UV inks and lacquers. Complete with exhaust fan and waste air hose.
Information Request

Self contained, with inking unit. Economy proofer designed for lower volume users.
Information Request

Specifically designed for proofing offset and UV flexo inks. Produces three colour strips if different film thickness on one test strip.
Information Request

For the rapid production of a colour proof. Easy to use.
Information Request

For determining the rubproofness of printed samples
Information Request

Windows based software, used in conjunction with a flat bed scanner to determine the PQI (Print Quality Index) of ink jet printing, as specified in the proposed Tappi Standards.
Information Request

Designed for intensive daily use. Measures the tack of printing inks and other liquids. Temperature controlled, with variable speed control from 50 – 450 m/min. New design for good repeatability. Easy to clean.
Information Request

Based on a highly sensitive diffusion probe, to objectively analyse print mottle. Gives a single Mottle Index value and more detailed analysis if required. Ideal for both quality control and research.
Information Request