Hand held. Converts each colour into LaB, YxY or LCh, Hi-Fi or Pantone in addition to giving density, dot gain, trap, contrast, and hue. Capable of measuring Tappi brightness.
Information Request

Produces a 4.2 inch circular sample with a ¼ inch centre hole in samples for the Taber Rotary Abraser Test.
Information Request

Measures the air porosity of filter paper, non-wovens and textiles. Very fast and repeatable benchtop test taking only 3 seconds per measurement.
Information Request

Hydraulically or pneumatically operated, with interchangeable cutting die boards for single or multiple specimen preparation.
Information Request

Measures fully automatically the absorption and desorption rates and total capacity of absorptic material. The small and rugged design is ideal for both quality control and research and development. Uses an optical sensor system, eliminating the use of an electronic balance. Windows 98/NT interface.
Information Request

Measures the smoothness of paper, or film. Ideal for sheets intended for quality printing. Complies with ISO 5627. Three volume ranges 1/10, 1, 10V. Statistical analysis and RS232 data output.
Information Request

For determining the bending resistance of paper and board using the 2-point method. Selectable bending angle and test length. Complies with ISO 2493.
Information Request

Microprocessor controlled paper and board versions available with a maximum capacity of 2000kPa. Pneumatic clamping. Interlinked safety devices. Displays bursting strength and bursting index.
Information Request

For cutting corrugated board samples ready for the Flat Crush Test (FCT).
Information Request

Available with 10, 25 and 100cm² rings, roller and blotters for testing the absorbency of water.
ConsumablesInformation Request

Designed especially for testing the absorbency of non-aqueous fluids. Includes timer.
ConsumablesInformation Request

For fluting a pre-cut 0.5 x 6 inch strip of corrugating medium in preparation for the CMT and CCT crush tests.
Information Request

Simple to use instrument for the testing of corrugated board and components. Maximum load 5kN. Fixtures available for FCT, ECT, RCT, CLT, CCT and CMT.
Information Request

For the non-contact evaluation of in-plane deformation caused by changes in humidity, temperature and tension of the sheet. Capable of detecting displacements of one micron, across a 50 x 50mm area.
Information Request

For drying pulp handsheets. Controllable drum speed and temperature.
ConsumablesInformation Request

For fast, accurate and repeatable measurement of the rate of penetration and surface wetting by a fluid of the surface of a sheet. Capable of measuring at the rate of 1 reading every millisecond. Specialised options available for measuring ink jet printability and advancing / receding angles.
Information Request

Measures liquid penetration dynamically, using an ultrasound transmission technique. Highly accurate, with data points at a millisecond resolution.
Information Request

Pneumatically operated, to cut corrugated board in preparation for the Edge Crush Test (ECT).
Information Request

Easy to use, especially for high volume testing applications. Frame capacity of 2kN and with a choice of load cells. Wide range of grips and fixtures. Choice of either Simplicity or MAP software operation and presentation of results.
Information Request

For determining the ash content of paper.
Information Request

Enables both direct and indirect coating of hand sheets, or a continuous web up to 300 mm wide. Precise metering of coating from doctored gravure cylinders.
Information Request

Measures the tendency of fibres to break free from the surface of the paper in the presence of water. The resultant free fibres may cause linting or loss of surface gloss.
Information Request

Small batch de-inking cell for assessing treatment of waste paper.
Information Request

Fully automated, computer controlled handsheet making system producing 60 dried paper handsheets per hour.
Information Request

Canadian Standard Freeness and Schopper – Reigler for assessing the freeness of wood pulp.
Information Request

Single, two and triple angle gloss meters, supplied to a wide range of specifications for different applications. Portable and supplied in a carry case with zero standard.
Information Request

Motorised and digital. Ideally suited for non-wovens and textiles.
Information Request

A unique instrument for objectively measuring the ‘Handle’ of sheet materials. Primarily used for tissue, non-wovens and textiles.
Information Request

For drying of hand sheets. 380mm x 400mm drying surface. User selectable temperature controller
Information Request

Microprocessor controlled and extensively re-engineered, to eliminate the errors inherent in the previously available analogue units. Complies with the Tappi Standard on Internal Bond Testing. Accurate and very repeatable results.
ConsumablesInformation Request

Large range of high precision, twin bladed cutters of fixed width from 1/8th inch - 75mm and up to 40cm long. For sample preparation of most sheet materials.
Information Request

Range of low and high (15%) consistency benchtop and pilot pulpers.
Information Request

Dewaters fibrous slurries to 50% consistency with multiple passes.
Information Request

For measuring the transmission rate across a membrane of all known permanent gases, air, oxygen, nitrogen, carbon dioxide, light hydrocarbons and inert gases. Two test chambers to speed testing. Very sensitive and highly linear with a measuring range of 1–10,000 Nml/m²/day. Built-in software predicts and continually updates the final 24-hour results as the test progresses.
ConsumablesInformation Request

For measuring the rate of water vapour transmission across a membrane. The aluminium oxide sensor gives a very sensitive and highly linear response over a wide range of 0.03–10,000 g/m²/day. Built-in software predicts and continually updates the final 24-hour results as the test progresses.
ConsumablesInformation Request

165 mm diameter, or 8 x 8 inch, or 12 x 12 inch stainless steel construction. For the production of hand pulp sheets. Optional white water return.
ConsumablesInformation Request

Measurement, application and presentation for use with the EJA Vantage Tensile and Burst Tester. Extends the capablitity of the EJA tensile testers by allowing user written test scripts. Ideal where conducting complex test regimes.
Information Request

Fully automated, highly repeatable pulp screen system for the analysis of contaries, shives and and stickies in wood pulp.
Information Request

Near infrared light is reflected through a fibre optic cable (up to 10m long). Allows for the accurate measurement of moisture content at sites with temperatures up to 190°C – inside drying hoods, near coating heads etc. Can detect the rate of coating pick up.
Information Request

Simple, reliable micrometer available in a range of specifications. Digital readout.
Information Request

On-line measurement of porosity of paper and non-wovens. A highly reliable and versatile system enabling faster grade changes, optimisation of refining and starch pick up, reduced web breaks and a greater proportion of product manufactured within specification.
Information Request

Specifically designed for measuring the porosity of very porous non-wovens and textiles. Results expressed in ft3 / minute.
Information Request

For fast and accurate evaluation of the wetting behaviour of a liquid on a solid surface. Manual measurement of: Static Contact Angle.
ConsumablesInformation Request

For fast and accurate evaluation of the wetting behaviour of a liquid on a solid surface. Computerised measurement of: Dynamic Contact Angle, Static Contact Angle, Surface Tension and Surface Free Energy
ConsumablesInformation Request

Portable and robust. Measures static contact angle, dynamic contact angle, surface tension and calculates surface free energy, by placing the instrument directly on the test surface. No sample preparation.
ConsumablesInformation Request

Microprocessor, motorised micrometer available in a range of specifications. Using state of the art measuring technology, full statistics and profiling capability are standard.
Information Request

For accurate sample preparation, ready for the Elmendorf Tearing Test.
Information Request

Microprocessor controlled Elmendorf tearing resistance tester with pneumatic grips, pendulum release and interchangeable pendulums.
Information Request

Microprocessor controlled Elmendorf tearing resistance tester with capacities available up to 25000g. Specifically designed for heavy duty substrates.
Information Request

Manually operated Elmendorf tester with manual pendulum release and grips. Range of capacities available to 1600g.
Information Request

For determining the puncture resistance of corrugated packaging. Selectable ranges 6, 12, 24 and 48 Joules. Digital read out. Fully enclosed and guarded for safe operation.
Information Request

Semi-automatic sheet former producing a large 200mm diamter sheet. Additional dryers and white water return options.
Information Request

With selectable temperature and pressure. For the pressing and de-watering of pulp handsheets.
ConsumablesInformation Request

Microprocessor controlled unit for determining the force required to open a carton and the stiffness of individual carton creases. Ideally suited for shop floor, or laboratory use, to check that production meets previously agreed specifications.
Information Request

Stainless steel construction, with air agitation and pneumatic couching for the consistent production of pulp hand sheets. Optional white water return.
ConsumablesInformation Request

Vibrating table for assimulated transport tests.
Information Request

For measuring the compression strength of fluting medium and test liner.
Information Request

Windows based for use with EJA Vantage Tensile and Burst Tester. Includes modules for tensile, compression, burst, tear, COF and peel testing.
Information Request

A multifunctional tester for the accurate measurement of the hot tack of packaging films and preparing test seals for seal strength testing. Touch screen interface for the selection of test temperature, pressure and dwell time, saving and recalling test settings.
Information Request

Fast and accurate analysis of colour. Available with specialist software for ink recycling and coloured paper broke recycling.
Information Request

Unique Windows based software for the accurate analysis of sheet cut quality. Enables the subsequent optimisation of mill cutting operations.
Information Request

'Very comprehensive, Windows based software for counting and giving a detailed analysis of dirt, stickies, shives and contaries in pulp and paper sheets. Selectable test parameters to comply with Tappi and CEN Standards or own selected test parameters.
Information Request

Selection of airbath and hot oil digesters for small scale pulping.
Information Request

Original Dennison wax pick sticks. Supplied either 8 of one type per box, or the complete starter box for wax pick testing. Available from stock for immediate dispatch.
Information Request

For the structural disintegration of pulps. With dual safety systems and lightweight polyurethane pot.
ConsumablesInformation Request

Three sided sample cutter for preparing samples for the Taber stiffness test - 1 ½ x 2 ¾ inch or 1 ½ x 1 ½ inch.
Information Request

Analogue and microprocessor models available. Reading in Taber units (equivalent to grammes force). Range extension and reduction fixtures to enable selection of the most appropriate range for the sample under test.
Information Request

A dedicated instrument based on the EJA Tensile Tester. Load cell type, very sensitive and specifically designed for testing tissue, non-wovens and other lightweight sheets. Complies with new CEN Tissue Bursting Strength Standard.
Information Request

Full range of balances with capacities from 150g to over 500kg and with readabilities from 0.0001g to 5000g
Information Request

Operates according to the Schopper Principle for determining the folding endurance of paper.
Information Request

A wide selection of cups available for testing the vapour transmission through sheet material.
Information Request

Semi-automatic evaluation of pulp fibre length, tensile and bonding strength. Fast and excellent levels of repeatability when compared with traditional evaluation methods.
Information Request

Complete Z-Span package including the Z-Span 2000 and an automated hand sheet forming system. Pulp fibre length, tensile and bonding strength obtained from wet pulp sample in 20 minutes.
Information Request