Hand held. Converts each colour into LaB, YxY or LCh, Hi-Fi or Pantone in addition to giving density, dot gain, trap, contrast, and hue. Capable of measuring Tappi brightness.
Information Request

Produces a 4.2 inch circular sample with a ¼ inch centre hole in samples for the Taber Rotary Abraser Test.
Information Request

Measures the air porosity of filter paper, non-wovens and textiles. Very fast and repeatable benchtop test taking only 3 seconds per measurement.
Information Request

Hydraulically or pneumatically operated, with interchangeable cutting die boards for single or multiple specimen preparation.
Information Request

For determining the bending resistance of paper and board using the 2-point method. Selectable bending angle and test length. Complies with ISO 2493.
Information Request

Microprocessor controlled with 4 averaging load cells and maximum capacity of 25kN. Four column heavy duty tester, will accept cartons 1m x 1m x 1m for testing to complete collapse, or held automatically at a pre-determined load to evaluate stacking loads.
Information Request

Microprocessor controlled paper and board versions available with a maximum capacity of 2000kPa. Pneumatic clamping. Interlinked safety devices. Displays bursting strength and bursting index.
Information Request

Bench-top headspace gas analyser, especially suitable for Quality Assurance applications. User product set up facility with gas target levels, tolerances and alarm limits. Fast and accurate.
Information Request

Rigid handheld portable headspace gas analyser. Designed for off site and 'away from the laboratory' applications. Holds the last 10 results. Auto power-off to save batteries.
Information Request

For cutting corrugated board samples ready for the Flat Crush Test (FCT).
Information Request

For real time, continuous monitoring of headspace O₂ + CO₂ in food packages as the products are being packed. For use in vacuum and tray seal applications. Optionally, it can measure buffer tank gas and can control PBI-Dansensor’s electronic gas mixer. User defined gas target levels, tolerances and alarm limits.
Information Request

For fluting a pre-cut 0.5 x 6 inch strip of corrugating medium in preparation for the CMT and CCT crush tests.
Information Request

Simple to use instrument for the testing of corrugated board and components. Maximum load 5kN. Fixtures available for FCT, ECT, RCT, CLT, CCT and CMT.
Information Request

For fast, accurate and repeatable measurement of the rate of penetration and surface wetting by a fluid of the surface of a sheet. Capable of measuring at the rate of 1 reading every millisecond. Specialised options available for measuring ink jet printability and advancing / receding angles.
Information Request

Pneumatically operated, to cut corrugated board in preparation for the Edge Crush Test (ECT).
Information Request

Easy to use, especially for high volume testing applications. Frame capacity of 2kN and with a choice of load cells. Wide range of grips and fixtures. Choice of either Simplicity or MAP software operation and presentation of results.
Information Request

Single, two and triple angle gloss meters, supplied to a wide range of specifications for different applications. Portable and supplied in a carry case with zero standard.
Information Request

Motorised and digital. Ideally suited for non-wovens and textiles.
Information Request

Microprocessor controlled and extensively re-engineered, to eliminate the errors inherent in the previously available analogue units. Complies with the Tappi Standard on Internal Bond Testing. Accurate and very repeatable results.
ConsumablesInformation Request

Large range of high precision, twin bladed cutters of fixed width from 1/8th inch - 75mm and up to 40cm long. For sample preparation of most sheet materials.
Information Request

Integrated into the packaging line, the LeakMatic gives 100% leak testing of the packed product. Using CO₂ as a trace gas, the LeakMatic detects micro-leaks at ppm levels. Fast operation, able to test 5-7 cases per min. Touch screen controls.
Information Request

Using CO₂ as a trace gas, the LeakPointer detects micro-leaks due to poor sealing, food entrapment, or pinholes in the packaging film. For use on single packages, groups of packages, or case packed product. Very sensitive, detecting leaks at ppm levels. Touch screen controls. Can also run a subsequent seal stress test automatically. Available as either a bench top, or larger mobile floor mounted E2 version.
Information Request

For measuring the transmission rate across a membrane of all known permanent gases, air, oxygen, nitrogen, carbon dioxide, light hydrocarbons and inert gases. Two test chambers to speed testing. Very sensitive and highly linear with a measuring range of 1–10,000 Nml/m²/day. Built-in software predicts and continually updates the final 24-hour results as the test progresses.
ConsumablesInformation Request

Very wide measuring range of permeability from a single instrument. Excellent repeatability and ease of use. Automatic set-up for all predefined test parameters, with automated control of humidity, temperature, flow and equilibrium detection. Test results are expressed directly in ml / m² / day. Complete trace ability in test documentation with error loggings. Self diagnostics with alarm functions. Built in printer.
ConsumablesInformation Request

Specifically designed to test water absorption or desorption in complete packages. Excellent repeatability. Aluminium oxide sensor gives very linear response over a range of 0.03-10,000g/m²/day. Built in software predicts final 24 hour results as the test progresses. Test chamber can be enlarged with extension rings to fit different package sizes.
Information Request

For measuring the rate of water vapour transmission across a membrane. The aluminium oxide sensor gives a very sensitive and highly linear response over a wide range of 0.03–10,000 g/m²/day. Built-in software predicts and continually updates the final 24-hour results as the test progresses.
ConsumablesInformation Request

Highly accurate Oxygen Analyser for industrial applications. Measuring range 100% - 0.1 ppm O₂. Built-in sampling pump. User definable alarms.
Information Request

For continuous monitoring of headspace O₂ + CO₂ in food packages as the products are being packed. Includes on-line gas analyser and random test function. User defined gas target levels, tolerances and alarm limits.
Information Request

A range of 3 high capacity 2 and 3 gas mixers with outputs up to 3300L/min. Designed for economic supply of multiple packaging machines from 1 mixer. Operating on a proportional mixing principle for high mix accuracy.
Information Request

Complete range of 2 and 3 gas mixers with capacities from 150L/min to 1000L/min. Operating on a proportion mixing principle, giving a high accuracy of mix regardless of flow rate.
Information Request

Measurement, application and presentation for use with the EJA Vantage Tensile and Burst Tester. Extends the capablitity of the EJA tensile testers by allowing user written test scripts. Ideal where conducting complex test regimes.
Information Request

Near infrared light is reflected through a fibre optic cable (up to 10m long). Allows for the accurate measurement of moisture content at sites with temperatures up to 190°C – inside drying hoods, near coating heads etc. Can detect the rate of coating pick up.
Information Request

Simple, reliable micrometer available in a range of specifications. Digital readout.
Information Request

For fast and accurate evaluation of the wetting behaviour of a liquid on a solid surface. Manual measurement of: Static Contact Angle.
ConsumablesInformation Request

For fast and accurate evaluation of the wetting behaviour of a liquid on a solid surface. Computerised measurement of: Dynamic Contact Angle, Static Contact Angle, Surface Tension and Surface Free Energy
ConsumablesInformation Request

Portable and robust. Measures static contact angle, dynamic contact angle, surface tension and calculates surface free energy, by placing the instrument directly on the test surface. No sample preparation.
ConsumablesInformation Request

Microprocessor, motorised micrometer available in a range of specifications. Using state of the art measuring technology, full statistics and profiling capability are standard.
Information Request

For accurate sample preparation, ready for the Elmendorf Tearing Test.
Information Request

For determining the puncture resistance of corrugated packaging. Selectable ranges 6, 12, 24 and 48 Joules. Digital read out. Fully enclosed and guarded for safe operation.
Information Request

Microprocessor controlled unit for determining the force required to open a carton and the stiffness of individual carton creases. Ideally suited for shop floor, or laboratory use, to check that production meets previously agreed specifications.
Information Request

A range of oxygen indicators for on-line industrial applications. Measuring ranges from 1ppm up wards. User defined settings and alarms.
Information Request

Vibrating table for assimulated transport tests.
Information Request

For measuring the compression strength of fluting medium and test liner.
Information Request

Windows based for use with EJA Vantage Tensile and Burst Tester. Includes modules for tensile, compression, burst, tear, COF and peel testing.
Information Request

A multifunctional tester for the accurate measurement of the hot tack of packaging films and preparing test seals for seal strength testing. Touch screen interface for the selection of test temperature, pressure and dwell time, saving and recalling test settings.
Information Request

Fast and accurate analysis of colour. Available with specialist software for ink recycling and coloured paper broke recycling.
Information Request

Three sided sample cutter for preparing samples for the Taber stiffness test - 1 ½ x 2 ¾ inch or 1 ½ x 1 ½ inch.
Information Request

Analogue and microprocessor models available. Reading in Taber units (equivalent to grammes force). Range extension and reduction fixtures to enable selection of the most appropriate range for the sample under test.
Information Request

For real time, continuous monitoring of headspace O₂ + CO₂ in food packages as the products are being packed. For use on vertical and horizontal flow wrap packing machines. Includes gas mixer, online gas analyser, random test function and proportional gas flow to enable the correct gas flow and avoid wastage of gas. User defined gas target levels, tolerances and alarm limits.
Information Request

To produce heat seals in flexible packaging materials for subsequent seal strength testing. Selectable jaw temperature, selectable sealing pressure and dwell time.
Information Request

A wide selection of cups available for testing the vapour transmission through sheet material.
Information Request