MAP Packaging Audit

280_Man_Looking_at_Meat_Pack

Why You Should Consider an Audit

  • Is your packing line running constantly at its designed speed?
  • Is the headspace gas in all of your products always correct?
  • Can operators run continuously without having to re-adjust the gas mixer?
  • Are all the packs inflated to the correct level?

If your answer is NO to ANY of these, then we can help with a FREE MAP Audit
and,
where applicable, a short on site trial.

Audit Outcomes: We’ve recently helped one customer to increase production speeds by 18% and another  has seen a 30% decrease in complaints.


Product Mould and Inadequate Shelf Life

Sometimes it’s not always obvious which part of the food packaging process the problem is coming from. Are packs being sealed without the correct headspace gas inside them, or are they subsequently leaking after sealing?

And often when you’ve looked for the problem for so long and not found the answer, another pair of eyes and the fresh thinking you get from our MAP Packaging Audit can be the swiftest solution.

What’s Involved?
Our objective is to help you optimise your packaging process by being a logical, unbiased and external set of eyes. Our approach is formulated on the information you give us about the likely causes of your problem and when the answer isn’t clear, we simply start at the gas tanks at one end and work our way to finished product at the other.

How Long Does it Take and What Does it Cost?
How long it takes is difficult to predict until the investigation begins, but all you pay for is our engineer’s time.

Further Examples of Solutions We’ve Identified for Customers
1. To help one customer identify the source of their leakers took our engineer two days. As a result of the audit they instigated new and effective quality assurance procedures and purchased a LeakMatic II leak detector and CheckMate 3 headspace gas analyser.

2. For another customer we identified the problem to be the incorrect verification procedure being used on their existing equipment. We established the correct calibration procedure and trained the responsible personnel to avoid re-occurrence. No other equipment purchase was necesssary.

Find Out More
If you would like to discuss your production concerns to book an audit to help you reduce leak and packaging problems,
please contact our sales team on 01223 492083 or via sales@tendringpacific.com

Leakmatic II Leakpointer_ii 300Leakpointer II E2 300CheckMate 3
LeakMatic II
Automatic In-line
Leak Detector 
LeakPointer II
Benchtop
Leak Detector
LeakPointer II E2
Off-line Leak
Detector
CheckMate 3
Headspace
Gas Analyser
MAP Mix
Provectus
MAP Check 3 Vacuum