TS-4 Heat Sealer
A precision heat sealer for producing accurate heat seals for peel strength measurements.
The TS-4 is a precision heat sealer designed to produce accurate heat seals for peel strength measurements.
The TS-4 produces consistent and accurate seals utilizing a precision load cell system which measures and displays the total force applied to the film sample. An integrated Digital Electronic Controller displays sealing force, load tare functionality, and dual selectable timer set points.
TS-4 Heat Sealer
Features
- Digitally controlled temperature
- Digitally controlled dwell time
- Independent upper and lower sealing temperatures
- Footswitch
- Safety guards and switches for safe operation
- Digital Seal Pressure Output display
- Switch selectable Dual set points for timer activation
Standards
ASTM F2029 Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
Optional Features
- Shelf Film sample tray
- Stationary 1 Piece Design
- Manual Sliding Tray
- Precision Bearing Guided Slide Table Design
- Magnetic Film Sample Hold Down
- Repeatable Film Sample Presentation
- Optional Seal Jaws (sold separately)
- One set of quick-change upper and lower seal jaws 25.4 x 101.6 mm (1 x 4 in) (steel-dyclad coated), other sizes available, please specify
- One upper quick-change steel jaw (dyclad coated) and one lower quick-change (polymer) seal jaw 25.4 x 101.6 mm (1 x 4 in)
- One set of quick-change upper and lower seal jaws with special pattern- please specify
Performance data
- Sealing Temperature
- Range:Ambient 205 °C (400 °F)
- Resolution: ±0.1 °C (0.18 °F)
- Sealing Pressure
- Range:9 kg – 72.5 kg (20 lbs – 160 lbs)
- Resolution:2 psi (14kPa)
- Sealing Dwell Time
- Range:100ms – 99 s
- Resolution:10ms
- Load Cell
- Capacity:136 kg (300lbs)
- Repeatability:0.09kg (0.2lbs)
- Accuracy0.09kg (0.2lbs)
- Calibration:5-Point Accredited
- Sealing Jaw Options
- Length:101.6 mm (4in) Maximum
- Width:6.35 to 25.4 mm (0.25 to 1.00 in)
- Seal Surface:Flat, Vertical, Horizontal, Custom or Standard Geometry
Connections
- Power:110V to 240V AC 50/60 Hz
- Air (clean, dry): 90psi – 120psi (100psi recommended)
Instrument size
- Width: 10 in. (254 mm)
- Depth: 12 in. (304 mm)
- Height: 21.5 in. (546 mm)
- Weight: 45 lbs. (20.4 kg)