MAP Mix Provectus – Argon for Welding / Electronics

New operating principle to advance the accuracy, operation and appearance of the gas mixer. Outstanding gas mixing capacity of up to 90m3/hour. Mixes oxygen, nitrogen, carbon dioxide, air and argon. Very low pressure drop over the mixer, making it suitable for working with nitrogen and oxygen generators.

Dansensor MAP Mix Provectus – Argon for Welding / Electronics

The revolutionary Dansensor MAP Mix Provectus uses an entirely new operating principle to advance the accuracy, operation and appearance of the gas mixer. Simple to use, highly reliable and rich in data, this mixer gives vital feedback on information such as current gas flow, total gas consumption and actual gas mix at any time.

With a simple configuration, you no longer need to worry about the specification of the right pressure and gasses when ordering, or consider whether it will work with your onsite generation system, or which gasses you need to mix. The only decision you need to make is whether you need to mix two or three gasses – everything else gets set up the first time you start the gas mixer.

Although only slightly larger than a shoe box, the Dansensor MAP Mix Provectus still delivers and outstanding gas mixing capacity of up to 90m3/hour (3200SCHF) – and if that’s not enough, up to three mixers can be bridged together to triple the capacity.

Benefits

  • Uses and intuitive touch screen for easy set up and operation
  • Meets traceable requirements by storing accurate information about current gas flow, consumption over time and gas mix.
  • Avoids operator error with programming of up to 10 standard gas mixes
  • Integrates fully with the MAP Check 3 gas analyser for ultimate effectiveness

Features

  • Data logging of consumption, date,time and gas mix
  • Very low pressure drop over the mixer, making it suitable for working with nitrogen and oxygen generators
  • USB, Ethernet (LAN), RS232, Modbus TCP connectors for data logging and control
  • Mixes oxygen, nitrogen, carbon dioxide, air and argon

Technical Specifications

General Standard Features
Mixer Configurations 2-gas or 3-gas models available, with LCD display, or as ‘Black Box’ without display
Connections 2 x RS232C, LAN 10/100Mbit (Modbus TCP), USB, 24 VDC logic for start/stop and alarm
Power Supply 103-132 / 207-264 VAC (autoranging), 47-63 Hz
Dimensions 192 x 230 x 375 mm (H x W x D)
Weight 12.0 – 14.0 kg (depending on model)
Mixer Parameters
Gas Media Dry and clean O2, CO2, Ar, N2, or Air (o°C to +50°C / 32°F to +122°F gas temperature)
Gas Inlet Pressure 20 to 10 bar 930 to 145 psi), depending on back pressure and flow
Pressure Drop Example: 1 bar at 10 bar input pressure (14.5 psi at 145 psi input pressure)
Gas Flow Per Gas String 6 to 500 L/min (0.21 to 17.6 SCFM)
Max Output Gas Flow 2-gas: 1000 L/min (2115 SCFH), 3-gas: 1500 L/min (3175 SCFH) depending on mixture setting
Mixer Settings Range 0%, 2% – 100%
Mixer Accuracy ± 2% absolute in flow ranges above 50 L/min 105 SCFH) total output flow. Argon: ± 2% absolute argon flow > 501
Flow Measuring Total and daily consumption
Operating Modes Buffer or Flow configuration,selectable in software and by installation
Accessories (Optional)
Protection Kit IP45 protection
Bracket Assembly 2 brackets, 8 screws
Buffer Tank Kit Tank 15l, fittings
Mix 2-gas 3-gas
Typical Mix 1 Ar 82% + CO2 18%, flow range: 33 to 609 L/min Ar 70% + CO2 20% + O2 10%, flow range: 60 to 714 L/Min
Typical Mix 2 Ar 90% + CO2 10%, flow range: 60 to 555 L/min Ar 70% + CO2 28% + O2 2%, flow range 300 to 714 L/min
Worst Case Mix Ar 98% + CO2%, flow range: 300 to 509 L/min Ar 88% + CO2 10% + O2 2%, flow range 300 to 568 L/min
Best Case Mix Ar 50% + CO2 50%, flow range: 12 to 1000 L/min Ar 34% + CO2 33% + O2 33% flow range: 18 to 1470 L/min

Options

Buffer Tank

Buffer Tank

Buffer Tank
The Dansensor stainless steel buffer tank is an option for the MAP Mix Provectus and MAP Mix 9001 gas mixers.

  • Can be combined with two, or more, buffer tanks to achieve a higher performance.
  • Each tank has a volume of 15 litres and a maximum pressure of 10 bar.
  • Can be either floor or wall mounted.

For more information, please contact our sales team
on 01223 492083 or via sales@tendringpacific.com