MAP Check 3 Pressure Online Gas Analyser – Gas Feed

The Dansensor MAP Check 3 Pressure is for the continuous measurement of a pressured gas. Analysing % Oxygen & % Carbon Dioxide, the Dansensor MAP Check 3 Pressure also displays "Balance".

Dansensor MAP Check 3 Pressure Online Gas Analyser – Gas Feed

The Dansensor MAP Check 3 Pressure is a specifically designed for the continuous monitoring of a gas mix from a pressured source, including buffer tanks and gas mixers. Part of the highly successful Dansensor MAP Check 3 family

Incorporating sensitive & accurate oxygen & carbon dioxide sensors, the analyser monitors the input gas continuously, displaying the results on a 5″ touchscreen display. The data can also be exported in realtime via a LAN or RS232 ports and there are USB connectons for the easy up & downloading of settings & test data. Access to the settings menu is via a changeable password.

The Dansensor MAP Check 3 Pressure is capable of operating at input pressures between 2 – 10 bar and so suitable for a wide range of applications. If the gas measured is outside the user pre-set range, the Dansensor MAP Check 3 Pressure can send a current or voltage signal and has 24VDC logic for start/stop of the process and for alarms.

Technical Specifications
O2 Sensor CO2 Sensor
Key Features Fastest and most accurate oxygen sensor0-100% range Temperature controlled dual beam infrared carbon dioxide sensor0-100% range
Accuracy ± 0.01% absolute range below 1% O2± 1% relative in range above 1% O2 ± 0.5% absolute± 1.5% relative to reading
Heating Time 10 minutes 8 minutes
General Standard Features
Models Oxygen only, carbon dioxide only, or combined oxygen and carbon dioxide
Connections x2 RS232C, LAN 10/100 Mbit (Modbus TCP), USB, current or voltage output, 24 VDC logic for start/stop process of alarms
Power Supply 103-132 / 207-246 VAC (auto ranging), 47-63Hz
Dimensions 192 x 230 x 375 mm (H x W x D)
Weight 8.5 – 11.5 kg (depending on model
Compliances Compliances Grab
Gas Inlet Pressure 2 to 10 bar (30 – 145 psi)
Gas Media Dry, clean and non-corrosive gasses
Accessories (Optional)
Protection Kit IP45 protection (better than NEMA 3S)
Bracket Assembly 2 brackets, 8 screws

Related Products
MAP Mix Provectus, MAP Check 3, MAP Check 3 Vacuum

Consumables
Click here for our full range of genuine Dansensor product consumables.

For more information, please call our sales team on 01223 492083 or e-mail sales@tendringpacific.com