Lab Master Universal Materials Tester
The Lab Master Universal Materials Tester enables the user to test tensile, compression, elongation, peel, stress-relaxation of a wide range of materials. Intregrated Windows PC and touch screen enables user to input test set-ups, view test values and graphs. Interfacveable to external PC. RS232 , printer and ethernet connections.
The Lab Master Tensile Tester provides precise, repeatable measurement of compression, elongation, peel, stress-relaxation and tensile measurements up to 250 lbf. Resolution to 0.01 lbf in 250 lbf. Thousands of data points per test are used to generate force/distance curves and perform calculations that document the material’s behavior during test.
Applications
Adhesives, electronics, film, foil, medical products, nonwovens, paper, paperboard, plastic, rubber, textiles, tissue, wire and more.
Features
- Integral Windows PC and touch-screen flat panel display in a compact, network-ready unit. No additional software or interface to external PC required.
- Includes Test Method Wizard software for fast test set-up
- Graph test results and display calculated values
- Break detection for faster test cycles
- Configure for R&D analysis or one-touch automated process control
- Interface to standard fixtures; custom fixtures available
- RS-232 output, printer, Ethernet
Specifications
Force (tension and compression)
| Maximum | ±1100N | 250 lb | Other force ranges available |
| Resolution | 1:26000 | ||
| Accuracy | ±0.5% or better | ±0.5% or better | Exceeds the requirements of ISO 7500-1 Class 0 |
| Overload rating | 150% | 150% | Of load cell capacity-tension or compression |
| Available with Interchangeable Load Cells | lbf 10, 25, 50, 100, 150, 250 | N 45, 110, 225, 445, 670, 1100 | Metric load cells available |
Travel and position
| Travel (maximum) | 1000 mm | 39.37 inches | Varies, depending on attachment |
| Position Resolution | 0.1 µm | 0.00004 inches |
Speed
| Range | .025 to 1016 mm/min | 0.001 to 40 inches/min |
| Accuracy (steady state) | Better than 0.05% | Better than 0.05% |
| Throat depth | 82 mm | 3.3 inches |
| Number of repeat cycles | 50 Steps | 50 steps |
| Data acquisition rate | 2 kHz | 2 kHz |
Display
| TFT flat panel touch screen | 300 mm | 12 inch |
Physical dimensions
| Height | 1700 mm | 67.00 inches |
| Width | 490 mm | 19.25 inches |
| Depth | 535 mm | 21 inches |
| Working surface height | 290 mm | 11.5 inches |
| Weight | 65 kg | 140 pounds |
Environmental range
| Temperature (operating) | 5 °C to 35 °C | 40 °F to 95 °F | |
| Temperature (storage) | -20 °C to 55 °C | -4 °F to 130 °F | |
| Humidity (operating and storage) | 10% to 85% | 10% to 85% | Non-condensing |
Electrical characteristics
- Supply voltage (auto-ranging): 110-120 V nominal ±10%, 50/60 Hz / 220-240 V nominal -5%, +10%, 50/60 Hz
- Current: 10 Amperes (max)
- Frequency: 50/60 Hz