Lab Master Stress-Strain Tester
For the precise determination of tensile and compression testing of resilient materials - rubber & plastics. Generates thousands of data points for showing the precise behaviour of materials and drawing curves. Access to setting of test parameters and results via TFT flat panel touch screen
The Lab Master Stress-Strain Tester provides precise, repeatable measurement of resilient materials with 0.1 gram force resolution and 0.02% full-scale accuracy.
Position is measured to 0.01 µm resolution and 0.02 µm repeatability. Thousands of data points per test are used to generate force/distance curves that reveal material behaviour during test.
Lab Master Softness Tester
Applications
Rubber, plastic
Specifications
Force
- Range & Resolution: 2270 gf x 0.1 gf
- Measurement Accuracy: ±0.5 gf or 0.5% of reading
- Control Accuracy: ±0.68 gf steady state
Position
- Range & Resolution: 160 mm Ã- 0.1μm
- Measurement Accuracy: ±1.0 µm, ±1.0 µm/60mm (cumulative)
Force (tension and compression)
- Maximum: ±2.3 kg ( ±5.0 lb) Other force ranges available
- Resolution: 0.1 g (0.0002 lb.)
- Accuracy: ±0.5% of reading. Exceeds the requirements of ISO 7500-1 Class 0.5
- Overload Rating: 150% Other force ranges available
Travel and Position
- Travel (maximum) 160 mm 6.25 inches Varies, depending on attachment
- Position Resolution: 0.1 µm (0.00004 inches)
- Position Repeatability: 0.2 µm (0.00008 inches)
- Position Accuracy: ±1.0 µm ( ±0.0004 inches)
- Position Accuracy (cumulative): ±1.0 µm/60mm ( ±0.000017 inches/2.4 inches)
Speed
- Range: 0.01 to 13 mm/sec (0.01 to 0.5 inches/sec)
- Accuracy (Steady State): better than 0.05%
- Throat Depth: 82 mm (3.3 inches)
- Number of Repeat Cycles: As Required
- Data Acquisition Rate: 2 kHz
Display
- TFT flat panel touch screen 300 mm 12 inch
Physical Dimensions
- Height: 880 mm (34.75 inches)
- Width: 490 mm (19.25 inches)
- Depth: 535 mm (21.00 inches)
- Working Surface Height: 290 mm (11.5 inches)
- Weight: 50 kg (110 lbs)
Electrical Characteristics
- Supply Voltage (universal): 100-240 VAC
- Current (max.): 10 Amperes
- Frequency: 50-60 Hz
Environmental Range
- Temperature (operating): 5 °C to 35 °C (40 °F to 95 °F)
- Temperature (storage): -20 °C to 55 °C (-4 °F to 130 °F)
- Humidity (operating and storage): 10% to 85% Non-condensing
Features
- User-selectable contact pressure, position, rate of separation and duration of test.
- Display test results as numbers and curves.
- Configure for R&D analysis or one-touch automated process control.
- RS-232 output.
- Includes Windows operating system and touch screen flat panel display in a compact, network ready unit.
- Innovative design (patent pending) maintains accuracy over changing loads and frequent use.
Connections
- Electrical: Auto-ranging Power Supply
- 100-120 V nominal ±10%, 50/60 Hz
- 220-240 V nominal -5% +10%, 50/60 Hz