Taber Linear Abraser – Scratch and Mar Accessories

Scratch and mar accessories for the Taber Linear Abraser

Multi-Mar Attachment
Taber’s Multi-Mar Attachment enables you to interchange different mar and scratch tools using one attachment. Use this tool with the Linear Abraser to evaluate coating resistance to scratch, mar and scrape per ASTM D2197. Note, due to the load limit of the Linear Abraser, the maximum recommended weight for testing is 2400 grams. A common reference to this type of test is the “paperclip mar test” or “dime scrape test”.

Each Multi-Mar Attachment includes a loop stylus, which is a 1/16-inch diameter rod, bent into a “U” shape with and outside radius of 0.128 inches and hardened to Rockwell HRC 56 to 58. The stylus is chrome plated with a surface finish of 8RMS. The maximum intended load on this stylus is 2500 grams. Optional tools that may be used with this attachment include a needle stylus, Hoffman stylus, coin and GEM #1 paperclip.

The needle stylus is made from the same material as the loop stylus, and has a 1mm diameter tip. This tip should not be loaded in excess of 2500 grams. The Hoffman stylus has a contact arc of 0.275 inches.

Linear Abraser – Scratch and Mar Accessories
Part No Model Description
133566 90° Multi-Mar Scratch Mar Attachment (100g) [includes loop stylus]
133136 45° Multi-Mar Scratch Mar Attachment (95g) [includes loop stylus]
133137 Loop Stylus (for use with Multi-Mar)
133138 Needle Stylus (for use with Multi-Mar)
133139 Hoffman Type Stylus (for use with Mult-Mar)
133178 Copper Coin (for use with Multi-Mar)
133553 Conical Scratch Tip, 0.1mm Diameter (9g)
133555 Conical Scratch Tip, 0.25mm Diameter (9g)
133557 Conical Scratch Tip, 0.4mm Diameter (10g)
133559 Conical Scratch Tip, 0.5mm Diameter (10g)
134622 Hemisphere Scratch Tip, 0.5mm Diameter (9.5g)
132347 Hemisphere Scratch Tip, 1.0mm Diameter (9.5g)
132348 Hemisphere Mar Tip, 7.0mm Diameter (11.5g)
130575 Scratch Kit, Stainless Steel (98g) [includes 139-55 & 139-56 tools, 7x measuring magnifier]
131604 Scratch Kit, Aluminum (33g) [includes 139-55 & 139-56 tools, 7x measuring magnifier]
132892 Diamond Tool Holder (9g) [includes 139-55 tool]
132910 Diamond Tool Holder (9g) [includes 139-56 tool]
121006 139-55 Conical Diamond Tool with 90°, 3 mil (.003”) radius point
121006-1 139-56 Conical Diamond Tool with 90°, 3.5 mil (.0035”) radius point
133475 5mm Scraper (37g)
133476 10mm Scraper (46g)
133314 Scratch Claw Kit (17g) [meets Nissan requirements]
133313 Scratch Claw, replacement
131716-1 Coin Holder Attachment – 45° (40g)
131716-2 Coin Holder Attachment – 60° (40g)
131716-3 Coin Holder Attachment – 75° (40g)
133453 Pencil Hardness Scratch Kit (34g)
133456 Pencil Set, replacement

Placing an order and Payment Options:

If you have a trading  account with Tendring pacific
We will supply the goods on receipt of a written Purchase Order and according to the trading terms agreed. All orders are subject to
our Standard Terms & Conditions of Sale in particular we draw your attention to clause 3.1 – small order administration charge.

If you do not have a trading  account with Tendring pacific

  1. Tendring pacific offer open account facilities on agreed terms based upon the reports supplied by an independent credit rating agency. Payment terms need to be agreed in writing by a senior officer of the client company before any open account transaction can be undertaken.
  2. Payment can also be made by Proforma Invoice for one off transactions or for urgent orders if open account terms are pending agreement.
  3. We accept both credit and debit cards – Visa, Mastercard, Maestro, JCB and Visa Electron

Logos for Tendring pacific Credit Card Purchases

Card Charges

  • For transactions below £250.00 (GBP) Tendring pacific waives the standard additional card charge of 2%
  • For transactions of £250.00 (GBP) and above, Tendring pacific adds a standard additional card charge of 2%

Please contact our sale team on 01223 492081 or